•
To move rearward, move the traction control rearward
(Figure 9). When reversing, look behind for
obstructions and keep your hands on the reference
bar (Figure 7).
•
To turn right, rotate the traction control clockwise (Figure
10).
Figure 10
•
To turn left, rotate the traction control counterclockwise
(Figure 11).
•
To stop, release the traction control (Figure 7).
Note: The farther you move the traction control in any
direction, the faster the machine will move in that direction.
Figure 8
Figure 9
G008131
G008132
Figure 11
Grinder Control Lever
Operate the grinder using the grinder control lever as follows:
•
To start the grinder (Figure 12), press the red button on
the top of the lever, then squeeze the trigger. Once the
grinder has started, you can release the red button.
•
To stop the grinder (Figure 12), release the trigger for
more than a half second.
Note: If you are operating the grinder an momentarily
release the trigger (i.e., less than a half second) the grinder
will continue operation.
1. Neutral
2. Start the grinder
•
To raise the grinder, pull back on the lever (Figure 13).
13
Figure 12
3. Run the grinder
4. Stop the grinder