Panasonic CQ-DC1 EUC Operating Instructions Manual page 35

Motor Antenna
Connect the vehicle motor antenna lead
to
the
blue motor antenna relay control lead.
Baftery
Connect the yellow battery lead
to the
correct
radio wire or to the battery fuse port on the
fuse
block.
Telephone Mute
Connect
the
orange telephone mute lead as
in-
structed
in
your cellular phone operator manual.
Antenna
Connect the antenna by plugging the antenna
lead into the antenna receptacle.
Equipment
Connect
any optional equipment such as
amplifi-
er,
according
to the
instructions furnished with
the
equipment. Keep about 12 inches (30 cm)
of
dis-
tance between the speaker cords/amplifier unit
and the antenna/antenna extension cord.
Read
the operating and installation instructions for
any
equipment you will connect to
this
unit.
Power
Connect
the red power lead to the correct
vehicle
radio
wire or to the appropriate fuse port on
the
fuse
block.
lf the stereo unit functions properly with all
these
connections made, disconnect the wires and
pro-
ceed to the
final
installation.
s
Final lnstallation
Lead Connections
Connect all wires, making sure that each
connec-
tion is insulated and
secure.
Bundle
all
loose wires
and fasten them with tape so they won't fall
down
later. Now insert the stereo unit into the
mounting
collar.
Congratulations! After making a few final
checks,
you're ready to enjoy your new auto stereo
sys-
tem.
o
Final Checks
1. Make
sure that all wires are properly con-
nected and insulated.
2. Make sure that the stereo unit is securely
held in
the
mounting collar.
3.
Turn on the ignition to check the unit for
proper operation.
lf
you
have difficulties, consult
your
nearest autho-
rized professional installer for assistance.
35