Table of Contents
Advertisement
Advanced user memory function
The user memory function retains the adjustments for a massage, such as "REPEAT" function or "BACK INTENSITY," so that the
massage will start with the saved settings.
Saving the user program settings
•
See page 39 for the settings that can be saved.
After completing the massage, or when the massage is stopped by pressing the
buttons will flash and the unit ready to save any settings that changed during the
massage.
1
Press the button for the program settings that you want to save while the
buttons flash (for approximately 15 seconds).
The program settings have been saved when the button you pressed and the user memory display
When the selected button starts flashing quickly
Other settings are already saved.
To update with new program settings, press the same button again.
•
To maintain the saved programs, press a different button.
•
The operation must be executed within approximately 15 seconds after the button starts flashing quickly.
When you want to use your saved massage settings
1
Press the
•
The power will turn off automatically if no operation is executed for 3 minutes without performing massage.
2
Press the
The user memory display
3
Select from Pre-Program, Quick Massage, Self-Program, or Manual Operation.
•
Massage starts without pressing the
•
It is also possible to change the settings. In that case, press
4
The massage will start after body scanning is completed.
EP30004.indb
38
button to turn on the power.
button used to save your settings.
turns on.
button.
button after the settings are changed.
, the
turn on.
38
2007/06/22
13:49:29
Advertisement
Table of Contents
