Hour Meter/Tine Engagement Display - Toro 29516 Operator's Manual

Note:
The lockout feature is engaged each time the
engine is switched off.
Motion-Control Levers
The motion-control levers are located on each side of
the top console and control the forward and reverse
motion of the machine
Move the levers forward or backward to control the
drive wheel on the same side forward or reverse
respectively. The wheel speed is proportional to the
amount you move the lever.
Important:
The tines rotate when the
motion-control levers are moved out of the
N position.
EUTRAL
1. Left motion-control lever
2. Right motion-control lever
3. Front reference bar
4. Front of machine
Multi-Function Switch
The multi-function switch is located to the left of the

hour meter/tine engagement display

This switch allows the operator to do the following:
•
increase or decrease the depth of aeration plug
•
lock or unlock the tine depth setting
•
reset maintenance service reminder screens
Hour Meter/Tine Engagement
Display
Smart Controller/Electronic Depth Control
The hour meter/tine engagement display is located to
the left of the ignition switch on the control console
(Figure 5).
Use the hour meter/tine engagement display to show
the following information generated by the smart
controller/electronic depth control system:
(Figure 6).
Figure 6
5. Forward
6. Neutral
7. Reverse
8. Rear reference bar
(Figure 5).
Aerating Hours
Alert and Error
Messages
Battery voltage
Refer to Using the Smart Controller/Electronic Depth
Control (page 19)
Hour Meter Display
The hour meter
engine hours.
Note:
The engine hours display when the ignition key
is in the position or while the engine is running.
OFF
The engine hours do not display while the machine
is aerating.
g223330
1. LCD Indicators/Information screen
2. Hour display
3. LED status light
Tine Engagement Display
The tine engagement display
shows the electronic tine depth setting.
12
Electronic depth Parking brake
control setting indicator
indicator for the
tines
Engine Hours Maintenance
Reminders and
Alerts
Interlock status LED Status Light
for more information.
(Figure 7) monitors and displays total
Figure 7
(Figure 8) monitors and
g211730