Toro 29516 Operator's Manual page 6

121-6163
1. Press to lower the tines.
1. Read and understand the Operator's Manual before servicing
this machine.
2. Clean and oil the chains and check the chain tension twice
every 8 hours
3. See the engine owner's manual for service
4. Check the auxiliary pump drive belt tension every 50 hours
5. Grease the front caster wheel bearings twice every 100 hours 10. Grease the tine shaft bearings 4 times every 25 hours
decal121-6163
2. Release to raise the tines.
1. Fuse location
2. Relay location
3. Main (20 A)
135-3685
6. Grease the belt idler pivot every 100 hours
7. Check the tire pressure - 23 psi twice every 50 hours
8. Check the hydraulic oil level twice (Use only recommended
hydraulic fluid) every 50 hours
9. Check the auxiliary hydraulic tank (Use only AW-32 hydraulic
fluid) every 50 hours
6
126-7875
4. Auxiliary (15 A)
5. Start relay
6. Not used
133-8062
decal126-7875
decal133-8062
decal135-3685