Technical Data; Items Supplied; Description Of The Appliance; Commissioning - Silvercrest KH 1147 Operating Manual

• Do not operate this appliance by means of an
external time switch or a separate remote control
system.
• After switching it off, allow the appliance to cool
completely before cleaning and storing it.
You can thus prevent the appliance
from being damaged
• To avoid damaging the non-stick coating of the
Sandwich Maker, remove your cooked foods
only with a plastic or wooden spatula or some
other suitable, non-metallic implement.
• For the same reason, do not use abrasive cleaners
and sharp objects to clean the appliance.

Technical data

Power rating:
Power consumption :

Items supplied

• Panini Grill
• Operating Instructions

Description of the appliance

1 Power cable
2 Safety lock
3 Red control lamp "Power"
4 Heat level regulator
5 Green control lamp "Ready"
6 Grip
7 Hotplates
8 Grease vent
9 Grease catchment tray
220-240 V, 50 Hz
~
2000 W

Commissioning

1. Take the appliance out of the packaging. Remove
all additional transport packing, e.g. plastic wrap
or cable holders.
2. Before the first usage, check that all items have
been delivered and there are no visible damages.
3. Read these operating instructions carefully.
4. Set up the appliance according to the safety
instructions.
5. Open the safety lock 2.
6. Clean the appliance with a damp cloth as de-
scribed in "Cleaning and Care".
7. Close the appliance.
8. Insert the plug into a power socket and allow the
appliance to heat up at its maximum temperature
setting for approx. 5 minutes.
Note:
Due to manufacturing residues, this initial heating up
could result in a light production of odour and smoke.
This is completely normal and is not dangerous.
Provide for sufficient ventilation, for example, open
a window.
9. After being heated up, remove the plug from
the wall socket and allow the appliance to
cool down.
10. Clean the appliance once more with a damp
cloth.

Operation

1. Close the appliance lid at the grip 6.
2. Push the grease catchment tray 9 into the app-
liance.
3. Insert the power plug into a wall power socket.
The red control lamp "Power" 3 glows.
- 27 -