Sony VPL-SW125 Operating Instructions Manual page 38

Item
Model
INPUT OUTPUT
(Computer/video)
Others connector
Operating
temperature/
Operating
humidity
Storage
temperature/
Storage humidity
Power
requirements
Power
consumption
Standby power
38
Specifications
Description
VPL-SX125/VPL-SW125
INPUT A RGB/YP
female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75
ohms terminated, RGB/P
terminated, Sync signal: TTL level high impedance,
positive/negative
Audio input connector: Stereo mini jack, rated input
500 mVrms, input impedance more than 47 kohms
INPUT B RGB input connector: Mini D-sub 15-pin female,
(VPL-SX125 RGB: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal:
only) TTL level high impedance, positive/negative
Audio input connector: Stereo mini jack, rated input
500 mVrms, input impedance more than 47 kohms
INPUT B HDMI input connector: HDMI 19-pin, HDCP support,
(VPL-SW125 HDMI audio support
only)
S VIDEO (S S video input connector: Mini DIN 4-pin, Y: 1 Vp-p ± 2
VIDEO IN) dB, sync negative, 75 ohmes terminated, C: (burst signal)
0.286 (NTSC)/0.3 (PAL/SECAM) Vp-p ± 2 dB, 75 ohms
terminated
Audio input connector: Phono jack × 2, rated input
500 mVrms, Input impedance more than 47 kohms
VIDEO (VIDEO Video input connector: Phono jack, 1 Vp-p ± 2 dB,
IN) sync negative, 75 ohmes terminated
Audio input connector: Shared with S VIDEO IN
OUTPUT MONITOR output connector: Mini D-sub 15-pin
female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75
ohms terminated, RGB/P
terminated, Sync signal: HD, VD 4 V (open), 1 Vp-p (75
ohms), positive/negative
Audio output connector: Stereo mini jack, stereo, 1
Vrms (maximum volume, when inputting 500 mVrms),
output impedance 5 kohms
RS-232C connector: D-Sub 9 pin female
LAN connector: RJ45, 10BASE-T/100BASE-TX
0 °C to 40 °C (32 °F to 104 °F)/20% to 80% (no
condensation)
–10 °C to +60 °C (14 °F to 140 °F)/ 20% to 80% (no
condensation)
100 V to 240 V AC, 3.0 A-1.3 A, 50/60 Hz
100 V AC: 290 W
240 V AC: 275 W
100 V AC: 3 W (when "Standby Mode" is set to
"Standard")/1 W (when "Standby Mode" is set to "Low")
240 V AC: 3 W (when "Standby Mode" is set to
"Standard")/1 W (when "Standby Mode" is set to "Low")
P input connector: Mini D-sub 15 pin
B R
P : 0.7 Vp-p ± 2 dB, 75 ohms
B R
P : 0.7 Vp-p ± 2 dB, 75 ohms
B R