Remote Commander And Control Panel - Sony VPL-SW125 Operating Instructions Manual

Remote Commander and Control Panel

Remote Commander
4
INPUT APA
2
MENU
3
ENTER
RETURN
4
ASPECT KEYSTONE
D ZOOM VOLUME
Control Panel
1 2 3
7
1
ECO MODE
6
RESET
PATTERN
PIC MUTING
5
FREEZE AUDIO MUTING
3 6
a Turning on the power/Going to
standby mode
?/1 (On/Standby) key
b Selecting an input signal
(page 11)
INPUT key
c Operating a menu (page 15)
MENU key
RESET key
ENTER /V/v/B/b (arrow) keys
RETURN key
This function is not provided in this
projector.
d Adjusting the image (page 12)
ASPECT key
KEYSTONE key
PATTERN key
This function is not provided in this
projector.
APA (Auto Pixel Alignment) key
Note
*
Use this key when inputting a computer
signal via the RGB input connector
(INPUT A/INPUT B (INPUT B is
available only for VPL-SX125)).
e Using various functions during
projecting
D ZOOM (Digital Zoom) +/– key
Enlarges a portion of the image while
projecting.
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2 Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you wish to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
Location and Function of Controls
*
*1
5