Epson DM-D110 User Manual page 6

Part Names
See Illustration A.
Note on Power-on
This product does not have a power supply switch. It automatically turns on
when the TM-T88V-DT/TM-T88VI-DT2 is started.
Changing the Orientation and Angle of the Display Unit
Hold the base of the customer display with your hand and move the display or
L-shaped pole to change the direction or angle. Make sure to move them gently in
the mobile range only. Moving with force may cause damages to the display unit.
See Illustration B for the L-shaped pole model and Illustration C for the straight
pole model.
DIP Switch
The DIP switch configures the communication settings and whether a self-test is
required. See Illustration D.
CAUTION:
Turn off the TM-T88V-DT/TM-T88VI-DT2 before you start setting the DIP switch. Do
not allow foreign objects to fall into the DIP switch. Setting the DIP switch with
the TM-T88V-DT/TM-T88VI-DT2 power ON or foreign objects inside the DIP switch
may damage the product.
Functions of DIP Switch 1
DSW1 no.
1-1 Data reception errors
1-2 Data Length
1-3 Parity check
1-4 Parity Selection
1-5 Switching transfer speed
1-6
1-7
1-8 Self-Test execution (*1)
1-9
Internal use. Do not change. Fixed to OFF.
1-10
(*1) Executes the self-test once only when the power is turned on.
6 DM-D110 USB Interface for TM-T88V-DT/TM-T88VI-DT2
Functions
Ignore
7 bits
With Parity
Even
See "Transfer Speed Switching."
Execute
ON OFF
Display "?"
8 bits
No Parity
Odd
Do not execute
Default Setting
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF