Mitsubishi Electric AE-200A Instruction Book page 13

[3] Checking the generation of trend log object
Check that the BACnet
®
BACnet Setting Tool, refer to the AE-200/AE-50/EW-50 Instruction Book –BACnet
the trend log object.
®
⑤ Use BACnet
(LOG_41mm84–LOG_41mm87: mm = PI controller address (01–50)) or "Trend Log Pulse Input Electric
Energy 1–4" (LOG_410084–LOG_410087) objects exist, and if they exist, insert a check mark.
Note
If it takes time to perform the operation in [3] "Checking the generation of trend log object", first perform the
operation in [1] "BACnet
item sheet (BACnet
For details on the procedures for operating BACnet
to the AE-200/AE-50/EW-50 Instruction Book –BACnet
WT08246X03
®
trend log object has been generated. If the trend log object is disabled from the
Trial Run Tool and check that the "Trend Log PI controller Electric Energy 1–4"
®
function: Entering the apportioned electric energy value" in 4-2-3 "Unit-related
®
)".
®
Trial Run Tool and checking the trend log object, refer
®
Trial Run Tool–.
13
®
Setting Tool– and enable