Driving Safety; Speed Cam Alert - HP f920 Series User Manual

Table of Contents

3.4 Driving Safety

The following driving safety function is for reference only. Drivers are

advised to exercise discretion based on actual road conditions.

Note:

1. The Driving Safety function is limited to triggering no more than two alarms at the same time. If a voice

and alert message have been triggered, any other alarm will be ignored until either of the two is settled.

2. Satellite positioning must be completed before functions such as Speed Cam Alert, Speed Position

Management, Speed Limit Alert, LDWS and FCWS to be enabled. Be sure to check that Satellite positioning has

been completed prior to using the product.

3. The detections of LDWS and FCWS may be inaccurate when used in rain, at night or in environments of

insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions.

If the Speed Cam Alert function is enabled, once your car's location is

determined by GPS and approaches a speed cam, this product produces

audible alert and screen message.

To enable the Speed Cam Alert, do the following:

Press the

the

Press the

button to enable the function.

Press the

The alarm screen turns red to remind you to slow down if you are driving

faster than the speed limit.

Note:

The speed cam alert function must have the speed cam datum from the country you use. The function will be

void if the product is used in any others countries. Please consult with the shop you purchased if the function

is void. There is no guarantee the speed cam datum will be included for the worldwide countries.

button to enter the OSD menu.

button to select Speed Cam Alert, and then press

button for entering function menu.

button to select On, and then press the

button to return recording screen.

Table of Contents