Motion And Collision Detection; Timelapse - HP f920 Series User Manual

3.5.2 Motion and Collision Detection

- In normal loop recording mode, press and hold POWER key for 3
seconds, the screen will show message "Press OK to power off or
enter Motion and Collision Detection after 10 sec." Please wait for 10
seconds and the camcorder will enter Motion and Collision Detection
automatically. The camcorder will turn off the screen temporarily, but
still in standby detection status. When the camcorder detects any
motion in front of lens or any vibration/collision, the video recording
will be triggered and the event will be recorded.
- To disable this function, press any key to wake up the screen, and press
again any key to resume to normal loop recording.
Note:
1. The video file taken in this mode will be saved in the "Emergency" folder.
2. In this mode, the event will be recorded for 10 seconds (per file). If the event lasts more than 10
seconds, the camcorder will keep recording up to 2 minutes.

3.5.3 Timelapse

- In normal loop recording mode, press and hold POWER key for 3
seconds, the screen will show message "Press OK to power off or
enter Timelapse after 10 sec." . Please wait for 10 seconds and the
camcorder will enter Timelapse automatically. The camcorder will turn
off the screen temporarily, but in timelapse recording status.
- To disable this function, press any key to wake up the screen, and press
again any key to resume to normal loop recording.
Note:
1. The video file taken in this mode will be saved in the "Video" folder.
2. In this mode, the camcorder is continuously recording by one second one frame. For example, 30
minutes recording will be saved in one minute.
3. The file size is according to Record Interval setting.
28