Siemens SIMATIC IPC MD-34A Quick Start Manual page 4

Hide thumbs Also See for SIMATIC IPC MD-34A:

Procedures

1. Put the battery connector down and align the battery edge to the sideway on charging slot. Insert the battery pack until the

battery connector is firmly connected to the charging pins.

2. The charging station beeps when the battery is well detected (buzzer default off). The LED in-dicator will then turn to AMBER

and the battery charger will start charging automatically.

Removing the Battery Pack

Perform the following steps:

1. The LED indicator turns to GREEN when the battery capacity is higher than 95% full.

2. The battery charger will stop charging when the battery packs are full charged.

3. Remove the battery pack directly.

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

SIMATIC IPC MD-34A Battery Charger

A5E52426055-AA, 05/2023

SIMATIC IPC MD-34A Battery Charger

A5E52426055-AA, 05/2023