Adding A Second Hard Drive - Dell Optiflex 740 User Manual

11. Partition and logically format your drive before you proceed to the next step.
See the documentation for your operating system for instructions.
12. Test the hard drive by running the Dell Diagnostics (see
13. If the drive you just installed is the primary drive, install your operating system on the hard drive.

Adding a Second Hard Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently
cushion it.
NOTICE: If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure.
1. Check the documentation for the drive to verify that it is configured for your computer.
2. Follow the procedures in Before You
3. Remove the plastic hard-drive bracket from the inside of the hard-drive bay by squeezing the release tabs and gently pulling the bracket up and out of
the bay.
4. Install the new drive into the bracket by inserting the drive into the bracket so that the bracket alignment tabs snaps into the mounting holes on the
new drive.
1 hard drive 2
4 bracket alignment tabs
5. If necessary, disconnect the power and SATA cables from the hard drive that is currently installed.
6. Carefully slide the new hard drive into the unused bay until it clicks into place.
7. Connect the power and SATA cables to the drives.
Dell Diagnostics).
Begin.
hard drive mounting holes 3 hard-drive bracket