Dell Optiflex 740 User Manual page 37

1 PCI Express x16 or DVI card
1 PCI Express x16 card 2 DVI card connector
1 fully seated card
4 bracket caught outside of slot
NOTICE: Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage
to the equipment.
7. Connect any cables that should be attached to the card.
8. Before you close the card retention mechanism, ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
l
The notch in the top of the card or filler bracket fits around the alignment guide.
l
9. Secure the card(s) by closing the card retention latch and snapping it into place.
10. Replace the computer cover (see
NOTE: See the documentation for the card for information about the card's cable connections.
2 PCI Express x16 card connector
3 PCI Express x16 card connector
2 not fully seated card 3 bracket within slot
Replacing the Computer Cover).