NEC EXP805 User Manual page 100

Chapter 2 Preparations
Part number Part name Riser card name
Slot number
CPU connected
PCI standard
PCI slot performance *1
Bandwidth/lane *1
PCI board type *2
Slot size
Available size
Fibre Channel Controller (1ch)
N8190-165
[PCI Express 3.0(x8)]
Fibre Channel Controller (2ch)
N8190-166
[PCI Express 3.0(x8)]
Fibre Channel controller (1ch)
N8190-171
[PCI Express 3.0(x8)]
Fibre Channel controller (2ch)
N8190-172
[PCI Express 3.0(x8)]
Fibre Channel controller (1ch)
N8190-163
[PCI Express 3.0(x8)]
Fibre Channel controller (2ch)
N8190-164
[PCI Express 3.0(x8)]
Dual Port 10GBASE-SFP+ Adapter
N8104-185
[PCI Express 2.0(x8)]
Dual Port 10GBASE-T Adapter
N8104-182
[PCI Express 2.0(x8)]
Dual Port 10GBASE-SFP+ Adapter
N8104-186
[PCI Express 3.0(x8)]
Dual Port 10GBASE-T Adapter
N8104-184
[PCI Express 3.0(x4)]
Dual port 25GBASE-SFP28 Adapter
N8104-187
(SFP28/2ch)
Dual Port 10GBASE-T Adapter
N8104-183
[PCI Express 3.0(x8)]
Quad Port 1000BASE-T Adapter
N8104-179
[PCI Express 2.0(x4)]
Quad Port 1000BASE-T Adapter
N8104-181
[PCI Express 2.0(x4)]
Dual Port 1000BASE-T Adapter
N8104-178
[PCI Express 2.0(x1)]
Dual Port 1000BASE-T Adapter
N8104-180
[PCI Express 2.0(x4)]
○ Installation Available － Installation Not Available
*1 The data transfer rate of PCI slot is calculated from a transfer band multiplied by the number of lanes.
<Ex.> x8 lanes = 64Gbps (one way)
*2 Shows a connector size. Cards having the number of plugs or lower can be connected.
<Ex.> x8 Plug→ x1card, x4card, or x8card can be fit in. x16card cannot be fit in.
･ Refer to the technical guide for the detailed feature of each card.
･ The contents inside brackets next to part names show card's own maximum performances.
･ In case the performances are different between a PCI slot and a PCI board, the device operates on the
lower performance.
・FH: Full height
・FL: Full length
・HL：Half length
*3 Refer to the list of riser card slots for slot performance/ slot form of each slot.
*4 Various types of riser cards are offered. Depending on the types of riser cards, performance, form and
support PCI card of a slot may be different. Check the compatibilities of PCI cards referring to the list of
riser cards.
100
RAID LOM 1st riser card *3
－ － SLOT1 SLOT2 SLOT3 SLOT4 SLOT5 SLOT6 SLOT7 SLOT8
CPU1
PCIe3.0
x8 x8 x8 x16 x8 x16 x8 x16 x8 x16 x8 x16 x8 x16 x8 x16
8Gb/s
x8 x16 x8 x16 x8 x16 x8 x16 x8 x16 x8 x16 x8 x16
－ －
Dedic Dedic FH FH FH FH FH FH FH FH FH FH FH FH FH FH
ated ated
to to
FL FL HL HL HL HL FL FL HL HL HL HL FL
RAID LOM
－ － 1 3 5
1 3 5
－ －
－ － 1 3 5
1 3 5
－ －
－ － 1 3 5
－ － 1 3 5
－ － 1 3 5
－ － 1 3 5
- - 1 3 5
1 3 5
－ －
－ － 1 3 5
1 3 5
－ －
1 3 5
－ －
1 3 5
－ －
1 3 5
－ －
1 3 5
－ －
The numbers stand for the order of installation.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
2nd riser card *3 3rd riser card*3
CPU2
x8
x8
FH
FL HL
Can't mix with
2 4 6 7 8
N8190-163/-164/-171/-172
Can't mix with
2 4 6 7 8
N8190-163/-164/-171/-172
2 4 6 7 8 Can't mix with N8190-165/-166
2 4 6 7 8 Can't mix with N8190-165/-166
2 4 6 7 8 Can't mix with N8190-165/-166
2 4 6 7 8 Can't mix with N8190-165/-166
2 4 6 7 8
2 4 6 7 8
2 4 6 7 8
2 4 6 7 8
2 4 6 7 8
2 4 6 7 8
Network cables with RJ-45 plug
2 4 6 7 8
covers cannot be used.
Network cables with RJ-45 plug
2 4 6 7 8
covers cannot be used.
2 4 6 7 8
Network cables with RJ-45 plug
2 4 6 7 8
covers cannot be used.
Remarks