Chapter 2 Preparations
1.30
Status LED Panel (System Insight Display) kit N8117-06
The LED display panel allows easy monitoring of the operating status of the entire system (Status LED Panel).
Using this panel allows for diagnosing.
2.5-inch drive model
Installing Status LED Panel kit
Please prepare the following before installing the options.
Parts included in the option kit
T-10 hexalobular driver
To install the components, follow these steps.
1.
See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Raise the levers on both sides of the fan cage, and remove it by lifting it upwards.
Important
The surface becomes hot after use so to avoid burns please allow the drive
and internal parts of the system to cool before touching.
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Note
Pay attention not to pinch the cables or fold them when connecting cables.
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Status LED Panel (N8117-06)
175