Installing The N8115-35 Tpm Kit - NEC EXP805 User Manual

Chapter 2 Preparations
Check the position of the TPM installer connector on the figure below.

Installing the N8115-35 TPM Kit

Procedure
To install the components, follow these steps.
1. Update System ROM
Please download the latest version from our support center website. For updating System ROM,
please follow the instructions on the website.
2. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3. Temporarily remove options and cables that prevent the installation of TPM.
Important To reduce the risk of personal injury, electric shock, or damage to the
equipment, remove power from the server by removing the power cord. The
front panel Power On/Standby button does not shut off system power.
Portions of the power supply and some internal circuitry remain active until
AC power is removed.
Important To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system
Express5800/R120h-2M (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
TPM KIT CONNECTORS
59