Accumulator; Personnel; Attachments; Work Under The Machine - Komatsu PC128UU-2 Operation & Maintenance Manual

SAFETY MAINTENANCE INFORMATION

ACCUMULATOR

The accumulator is charged with high-pressure nitrogen gas.
When handling the accumulator, careless procedure may
cause an explosion which could lead to serious injury or prop-
erty damage. For this reason, always observe the following
precautions.
Do not disassemble the accumulator.
●
Do not bring it near flame or dispose of it in fire.
●
Do not make holes in it, weld it, or use a cutting torch.
●
Do not hit or roll the accumulator, or subject it to any impact.
●
When disposing of the accumulator, the gas must be released.
●
Please contact your Komatsu distributor to have this work performed.

PERSONNEL

Only authorized personnel can service and repair the machine. Do not allow unauthorized personnel into the area.
If necessary, employ an observer.

ATTACHMENTS

Appoint a leader before starting removal or installation
●
operations for attachments.
Place attachments that have been removed from the
●
machine in a stable condition so that they do not fall. And
take steps to prevent unauthorized persons from entering
the storage area.

WORK UNDER THE MACHINE

If it is necessary to go under the work equipment or the
●
machine to carry out service and maintenance, support the
work equipment and machine securely with blocks and
stands strong enough to support the weight of the work
equipment and machine.
It is extremely dangerous to work under the machine if the
●
track shoes are off the ground and the machine is sup-
ported only by the work equipment. If the control levers are
touched by mistake, or there is a hazard to the hydrauli-
cline, the work equipment or the machine may suddenly
descend. This is extremely dangerous. Never work under
the machine if the machine is not properly supported by
blocks or stands.
2-38
SAFETY