Installing The Pass-Thru Module; Manually Configuring The Pass-Thru Module; Module Security; Installing The Module - HP 10GbE Pass-Thru Module User Manual

Installing the pass-thru module

Manually configuring the pass-thru module

Configure the pass-thru module manually using a CLI. See "Accessing the pass-thru module
the pass-thru module

Module security

The 10GbE Pass-Thru Module does not provide network security. You must provide security for the module
from somewhere else on the network.

Installing the module

CAUTION:
IMPORTANT:
selected.
If a blank is installed in the bay, open the handle (1) and pull the blank out of the bay (2).
1.
Open the handle on the pass-thru module.
2.
Insert the pass-thru module into the bay (1).
3.
CLI" on page 10)" for more information.
Do not attach the pass-thru module cables until after configuration.
Make sure that the server NIC configuration matches the pass-thru module bay
Get other manuals https://www.bkmanuals.com
("Accessing
Installing the pass-thru module 9