Positioning - Electrolux SP New R452a Operator's Manual

Edition: October, 2023
Fig. 18
Fig. 19

6. POSITIONING

FOR MAINTENANCE WORKER ONLY
The installation and subsequent servicing
operations must be carried out by skilled
members who have been trained to use the
device and in
regulations in force.
a) Remove the packing (fig.18) and preserve it
in order to reuse for winter storage.
Caution
All the parts of the packaging must be kept
beyond the range of children, as they might
represent a potential safety/health risk.
b) Make sure the
condition.
c) Rest the machine on a sturdy, horizontal
surface making sure it is well ventilated by
leaving a gap of 20 cm around it and do not
install it near heat
recommend you
temperature between
(between 75 and 90°F).
d) Check that the power mains voltage meets
the specifications
identification plate and that the output available
meets the device's power requirements.
Fit the plug into an earthed socket, removing all
multiple adaptors.
FOR FURTHER PRECAUTIONS, READ THE
SECTION "CONNECTION TO THE ELECTRICITY
MAINS" CAREFULLY.
e) The installation must be carried out in
accordance with the manufacturer's instructions.
Failure to comply with the positioning and
installation instructions
machine's operation.
Important
You are legally required to provide a suitable
grounding system for the equipment.
Before carrying out any cleaning and/or special
maintenance on the device, make sure it is
disconnected from the mains by unplugging it.
In the event of a breakdown or malfunctioning,
switch off the device and remove the plug.
Revision: 0
compliance with
machine is in perfect
sources (fig.19);
to maintain a
24 and
on the equipment
may impair
Pag.: 13/28
the
we
room
32°C
the