Table of Contents
Advertisement
Infrared sensor
节能设置
Enter [*] twice followed by master PIN code
and confirm with [#].
Enter [2] to go to system settings and then
enter [5] to enable or disable the infrared
sensor. Once heard a voice prompt of
"Succeeded", keep pressing [*] until you
finally exit the master mode.
Attention
The infrared sensor turns on by default.
Network setting
Network connection
节能设置
Enter [*] twice followed by master PIN code
and confirm with [#].
Enter [4] to join a network. After a
successful network connection, the system
will automatically exit the master mode.
App pairing guide
①
Download official App
Please search and download Philips
EasyKey Plus on your phone.
②
Lock intergration
Option 1: QR code scanning
1. Power on your door lock and find the
QR code placed on the battery cover.
2. Sign in official app and choose "Add
a device" on the first screen to enter QR
code scanning page.
3. After scanning the QR code on
the battery cover, please follow the
instructions to complete the pairing set
up in the app.
Option 2: Manual operations
1. Sign in official app and tap "Add a
device" in the first screen and choose
"Manual".
2. Perform a search for product model
on current page and then go to network
connection page.
3. Enter [*] twice on the door lock, then
enter master PIN code and confirm with
[#] to go to master mode. Enter [4] to
join a network and you will hear a voice
prompt of "Connecting, please wait a
moment".
③
Return to official app and follow the
instructions to complete the pairing set
up .
Attention
Philips Easykey is only compatible with a
router with dedicated 2.4 Hz (5G Hz Wi-
Fi is not supported). Please make sure the
distance between the door lock and the
router is less than 10 meters, otherwise
the connectivity of the router will be
affected.
13
Advertisement
Table of Contents
