Instructions - Philips Alpha Series User Manual

Instructions

The following installation steps only apply to right-handed door. For left-handed
door, please read [Before installation] carefully and make necessary adjustments.
Mark the hole for drilling with drilling
1
template and drill the marked hole,
then mount the mortise into the hole
and fasten it with four anchor screws.
Attention
Make sure the latch bolt stays inside the
door during installation.
Pull the connector through the hole
3
and insert the square shaft into the
hole on the mortise, making sure the
front escutcheon is flush against the
door.
6
Install threaded pipes on the front
2
escutcheon and put the compressed
spring and square shaft accordingly
into the corresponding holes.
M6 threaded
pipe
Attention
Please choose the proper square shaft and
threaded pipe to suit your door thickness.
Place the mounting plate on the door
4
and fasten it with two M5 anchor
screws.
M5 threaded pipe
M6 threaded
pipe
Mortise connector
Escutcheon connector
Wi-Fi antennas