To Leave The Service Position - Husqvarna Rider 13C Workshop Manual

Reparation instructions
5
1
2
Lift off the drive belt (1). Now pull out the pin (2).
Make sure not to trap your hand.
6
Pull the frame forwards and replace the pin.
7
Grip the front edge of the deck, and pull out and
lift it up to the service position.
If the cylindrical bolt, which is now holding the
mowing deck is removed, the mowing deck can be
lifted off.

To leave the service position

To leave the service position, reverse the
procedures set out in "Placing in the service
position". Make sure that the "lug" (3) on the
mowing deck enters the clamp correctly on the
underside of the machine, see diagram.
51
English –