The printer is turned off.
7. Check that ON lamp is off and
7.
Important
• Do not unplug the printer while the ON lamp is lit or flashing, as it may cause malfunction or
•
damage to the printer, making the printer unable to print.
8. Open the scanning unit / cover again.
8.
9. Remove the carriage stopper (C) and insert it all the way into the hole in the printer side.
9.
Pull the carriage stopper forward while pulling it up and insert it in the same orientation.
10. Close the scanning unit / cover.
10.
11. Retract output tray extension and paper output tray.
11.
12. Retract paper support.
12.
unplug power
cord.
145