Setting Items for Copying
You can change the copy settings such as the page size, media type, and intensity.
In the copy mode, press the MENU button, use the
button.
Use the
button to adjust each setting item, then press the OK button. The next setting item is
displayed.
The LCD returns to the Copy standby screen when all the settings are complete.
Note
•
• The
(asterisk) on the LCD indicates the current setting.
•
• Some settings cannot be specified in combination with the setting of other setting items or the copy
menu.
•
• The settings of the page size, media type, etc. are retained even if the printer is turned off.
• Enlarge/Reduce
•
Select the reduction/enlargement method.
Reducing/Enlarging Copies
Ex:
Note
•
• This setting item is displayed under the following conditions.
When standard copying is selected
When Borderless copy is selected for Special copy
• Copy intensity
•
Change the intensity (brightness).
Ex:
Note
•
• If you select Manual adjust, use the
increase it.
•
• Page size
Select the page size of the loaded paper.
Ex:
button to select a setting item, then press the OK
button to decrease the intensity or the
277
button to