Power Button With Fingerprint Reader; Removing The Power-Button With Fingerprint Reader - Dell 0D8MH Service Manual

Using the alignment posts, place the power button into the slot on the palm-rest and keyboard assembly.
Next steps
1. Install the I/O board.
2. Install the left fan.
3. Install the base cover.
4. Follow the procedure in

Power button with fingerprint reader

Removing the power-button with fingerprint reader

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the left fan.
4. Remove the I/O board.
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
About this task
The following image(s) indicate the location of the power-button with fingerprint reader and provides a visual representation of
the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Before working inside your
Removing and installing components 45