Solid-State Drive; Removing The M.2 2230 Solid-State Drive - Dell 0D8MH Service Manual

Steps
1. Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly, and snap it into
place.
2. Tighten the three captive screws (M2x6) that secure the base cover to the palm-rest and keyboard assembly.
3. Replace the four screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
Follow the procedure in After working inside your
NOTE: If you have disconnected the battery cable, ensure to connect the battery cable. To connect the battery cable,
follow the steps in Installing the

Solid-state drive

Removing the M.2 2230 solid-state drive

Prerequisites
1. Follow the procedure in
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
14 Removing and installing components
computer.
battery.
Before working inside your computer.