Operation
Malfunctions can cause injuries or gearbox damages
In the event of changes during operation, the drive component must be switched off
immediately.
Determine the fault as described in Section "Faults, causes and remedies" in the gearbox
operating instructions. Remedy faults or have faults remedied.
Check the gear unit during operation for:
• Excessive operating temperature
• Changes in gear noise
• Possible oil leakage at the housing and shaft seals
• Smooth and vibration-free operation
BA 2039 (2KJ4)
Operating Instructions, 12/2022, A5E50009089A/RS-AJ
CAUTION
5
37