Pre-Operation Preparation; Screen Display - Sanyo DSR-2016 Instruction Manual

Pre-operation preparation

Screen display

Upon turning the power on live video is displayed on the multi-16 screen.
• The screen display can be hidden except for the recording screen display. (P31)
b Example of multi-16 screen
1 2 34
:A
CH1 CH2
C
CH5 CH6
CH10
CH9
CH13 CH14
7 8
1 Operation display
: Displayed during live video sequencing.
: Displayed during alarm output.
: Displayed when the alarm output is set to DISABLE.
: Displayed during remote operation by PC.
2 Remote control display (P41)
:A : Displays the remote control ID currently in
operation.
If no remote ID is set the message "A(all)" is
displayed.
3 Alarm input display
: Displayed during motion or external alarm input
(ALARM IN).
4 Security lock display
: Displayed when setting the security lock. (P28)
5 Hard disk used capacity display
Displays the amount of recording on the hard disk from
0-99%. When the disk is full, "99%" changes to "FULL".
When the recording settings are set to overwrite and the
hard disk is full, 99% changes to
overwriting mode.
5 6
2% 2007/05/03 09:04:54
CH3 CH4
CH7 CH8
CH11 CH12
CH15 CH16
which represents
b Example of single-screen
1 2 34
:A
6 Date and time display
This unit manages the recorded videos according to their
date and time. Make sure the correct date and time are set
in the CLOCK SET. (P9)
7 Camera channel display
CH1 - CH16
Select display/hide channel in "OSD settings" in "LIVE
settings". (P31)
8 Recording display
Factory default settings start continuous recordings (C)
automatically once the power is turned on. Change the
recording mode using the menu settings. (P35)
C: Recording in the continuous mode (CONTINUOUS)
R: Recording in the real time mode (When pressing the
REC/STOP button)
M: Recording in the motion detection mode (MOTION)
A: Recording in the ALARM IN detection mode (ALARM)
• If a live video is disconnected, the message "VIDEO
LOSS" is displayed on the monitor.
• If a video signal is not connected to the video input
terminal, the message "NO VIDEO" is displayed on
the monitor.
5 6
2% 2007/05/03 09:04:54
CH1 C
7 8
8