L Setting A Remote Control Id - Sanyo DSR-2016 Instruction Manual

SYSTEM settings
L
Setting a REMOTE CONTROL ID
Allows to set an ID number on the supplied remote control
and use it as an exclusive remote control when multiple units
are connected.
The initial value is set to "00" and the remote control display is
displayed on the monitor, remote operations are always
available.
DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
DATE FORMAT
CLOCK SET
RS485 SET
PTZ CONTROL
LANGUAGE
REMOTE CONTROL ID
Remote control display
:A
REC/STOP
1
34
4
7
34
ID
41
SYSTEM
DVR
MM/DD/YYYY
ENGLISH
00
2% 2007/05/03 09:04:54
CH1 R
ALARM
2 3
5 6
8 9
0
10
b Operating this unit via the remote controller ID
(Example: 4)
1
Select "REMOTE CONTROL ID" using the control
button ({|) and select the ID number (Example:
04) using the control button (}~).
Selection: 01/02/ ... 98/99
DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
DATE FORMAT
CLOCK SET
RS485 SET
PTZ CONTROL
LANGUAGE
REMOTE CONTROL ID
2
Press the EXIT/STOP button repeatedly to return to
the live screen.
The remote display of the live screen disappears, an ID
number is necessary to perform remote operations.
3
Press the ID button of the remote control and press
"04" using the numeric buttons.
:04
The remote control display reappears, the ID number
04 set in the SYSTEM settings allows the operation of
this unit.
Memo: The remote control ID (04) currently in use is
displayed on the monitor screen.
If no remote control ID has been set "A (ALL)" is
displayed.
SYSTEM
DVR
MM/DD/YYYY
ENGLISH
04
2% 2007/05/03 09:04:54
2% 2007/05/03 09:04:54