Inserting/Replacing The Battery; Handling And Operation; Establishing A Connection To A Smartphone - Silvercrest 406210 2207 Operating Instructions Manual

Inserting/replacing the battery

♦ Open the battery compartment on the rear of the remote
release 8. To do this, turn the battery compartment cover w,
e.g. with a coin, in the direction of the arrow OPEN until the
arrow on the battery compartment cover w points to the
open lock symbol
♦ Insert a CR 2032 battery into the battery compartment.
The positive terminal should face upwards.
♦ Replace the battery compartment cover w on the back of
the remote release 8 and lock the battery compartment.
To do this, turn the battery compartment cover w in the
direction of the arrow CLOSE until the arrow on the battery
compartment cover w points to the closed lock symbol
Ensure that the sealing ring is properly inserted into the frame
of the battery compartment.
NOTE
If the operating LED 0 flashes red every second, the
►
battery is depleted and must be replaced.

Handling and operation

Establishing a connection to a smartphone

Before you can use the selfie stick, you must first pair the remote
release 8 with a compatible smartphone via Bluetooth
NOTE
► This product supports the operating systems iOS 8.0
or higher and Android 6.0 or higher. As Android is an
open-source system, each manufacturer determines the
key assignment of its camera app themselves. On some
smartphones no image can be triggered with the original
camera app, and there may be various malfunctions when
pressing the
of the operating system to see whether the settings offer an
option for setting the volume control (+) as an additional
trigger button.
│ GB │ IE
■ 8
.
button q. In this case, check the settings
.
®
.
SSBS 3.0 A2