Philips S99 Series Manual page 24

ENGLISH
24
Preparing the SmartClean system for use
Do not tilt the SmartClean to prevent leakage.
Note: Hold the SmartClean while you prepare it for use.
1 Put the small plug in the back of the SmartClean
system.
2 Put the adapter in the wall socket.
3 Press the button on the side of the SmartClean
system (1) and lift the top part of the SmartClean
system (2).
4 Pull the seal off the cleaning cartridge.
5 Place the cleaning cartridge in the SmartClean
system.
6 Push the top part of the SmartClean system back
down ('click').
Using the SmartClean system
Always make sure to shake excess water off the shaver
before you place it in the SmartClean.