Document Revision History - Hitachi Relion 670 Series Communication Protocol Manual

Hide thumbs Also See for Relion 670 Series:

Applications manual (438 pages)

Commissioning manual (284 pages)

Product manual (192 pages)

Table Of Contents

Table of Contents

Section 1

Introduction

The engineering manual contains instructions on how to engineer the IEDs using the various tools

available within the PCM600 software. The manual provides instructions on how to set up a PCM600

project and insert IEDs to the project structure. The manual also recommends a sequence for the

engineering of protection and control functions, as well as communication engineering for IEC 61850.

The installation manual contains instructions on how to install the IED. The manual provides procedures

for mechanical and electrical installation. The chapters are organized in the chronological order in which

the IED should be installed.

The commissioning manual contains instructions on how to commission the IED. The manual can also be

used by system engineers and maintenance personnel for assistance during the testing phase. The

manual provides procedures for the checking of external circuitry and energizing the IED, parameter

setting and configuration as well as verifying settings by secondary injection. The manual describes the

process of testing an IED in a substation which is not in service. The chapters are organized in the

chronological order in which the IED should be commissioned. The relevant procedures may be followed

also during the service and maintenance activities.

The operation manual contains instructions on how to operate the IED once it has been commissioned.

The manual provides instructions for the monitoring, controlling and setting of the IED. The manual also

describes how to identify disturbances and how to view calculated and measured power grid data to

determine the cause of a fault.

The application manual contains application descriptions and setting guidelines sorted per function. The

manual can be used to find out when and for what purpose a typical protection function can be used. The

manual can also provide assistance for calculating settings.

The technical manual contains operation principle descriptions, and lists function blocks, logic diagrams,

input and output signals, setting parameters and technical data, sorted per function. The manual can be

used as a technical reference during the engineering phase, installation and commissioning phase, and

during normal service.

The communication protocol manual describes the communication protocols supported by the IED. The

manual concentrates on the vendor-specific implementations.

The cyber security deployment guideline describes the process for handling cyber security when

communicating with the IED. Certification, Authorization with role based access control, and product

engineering for cyber security related events are described and sorted by function. The guideline can be

used as a technical reference during the engineering phase, installation and commissioning phase, and

during normal service.

1.3.2