Installation - Sharp HN-VA401SU Operation Manual

Powerline ethernet adapter kit
Table of Contents

Advertisement

Installation

Installation
1
Plug the power cords of the adapters into electrical outlets at the desired
locations of your house.
• It is recommended that you plug each adapter directly into an electrical
outlet. Plugging the adapters into a surge protector or other device may
impair performance. (The adapters have their own surge protection.)
• The POWER indicator on each adapter will blink orange and green while
the adapter starts up.
Do not plug the
adapter into the same
outlet as another AC
adapter or charger
If you already have a HomePlug AV 1.1 network
If you are adding the adapters to an existing HomePlug AV 1.1 network,
you must first cancel the registration of the adapters (page 18), and then
register them using an existing adapter on the network (page 11).
8
Do not plug the
adapter into a power
strip with a built-in
noise filter
Do not plug the
adapter into the same
power strip as
another AC adapter
or charger

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents