Sharp HN-VA401SU Operation Manual page 12

Powerline ethernet adapter kit
Table of Contents

Advertisement

Installation
Note: Do not connect two PLC adapters together by a LAN cable
The maximum distance (length of power line) over which PLC adapters
can communicate is about 492 ft. (150 m). However, this will vary
depending on line conditions such as the amount of noise on your
power lines.
A communication speed of up to 85 Mbps is possible. However, the
distance between adapters, noise on the line, and other factors may
cause slower speeds. If you find that communication is not satisfactory,
try plugging the adapter into a different outlet.
Communication may be slow or impossible on some power line
systems. In particular, if your power lines consist of two different
systems of differing phase, or if lines are separated by a breaker or
other equipment, communication between the two systems or lines may
be slow or impossible. In this case, try plugging the adapter into a
different outlet.
10
LA N
LA N

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents