ENGLISH
28
3
Place the shaver in the holder (1), tilt the
shaver backwards (2) and press down the top
cap to connect the shaver ('click') (3).
, The battery symbol starts to flash, which
indicates that the shaver is charging.
4
Press the on/off button on the SmartClean
system to start the cleaning program.
, The on/off button and the rinsing symbol both
light up continuously.
Note: The rinsing phase takes approx. 10 minutes.
Note: The progress bar shows the progress of the
rinsing phase.
, During the drying phase, the drying symbol lights
up continuously.
Note: The drying phase takes approx. 4 hours.
Note: The progress bar shows the progress of
the drying phase.
, When the cleaning program has been completed,
the ready symbol lights up continuously.
, The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Note: Charging takes approx. 1 hour.
Note: If you press the on/off button of the
SmartClean system during the cleaning program,
the program aborts. In this case, the rinsing or drying
symbol goes out.