Status Menu
Overview
This menu is used to view general data about the monitor status, current channel, etc.
When Status is selected, the following menus are displayed.
iStatus
CH Status
B
Slot Status
Option1 HD-SDI/D1
B
Option2 D1
B
Option3 Composite
B
Option4 Component
B
SDI Payload ID Status B
HDMI Status
B
Menu Function and Operation
Menu
CH Status
Slot Status
Option1 to Option4
v
1/2
iStatus
V
Model Name:
Serial No:
Software Version:
Operation Time:
Backlight:
Network Switch:
Controller Status
Function and operation ([
Displays the information on the used channels.
The information of the internal signal assigned to the channel number is displayed on the
channels 91 to 97.
CH: Channel number
Op: Option slot number
In: Input connector number
Format: Input signal format
Name: Channel name
For details on the assigned signal, see "Channel numbers 91 to 97 assignment" on page 35.
Displays the type of input adaptor installed in Option1 to Option4.
D1: When BKM-220D is installed
Composite: When BKM-227W is installed
Component: When BKM-229X is installed
HD-SDI/D1: When BKM-243HS or BKM-244CC is installed
3G-SDI: When BKM-250TG is installed
Empty: When the adaptor is not installed
Unknown: When non-supported adaptor is installed
When the item is selected, the model name and serial number of the installed input adaptor
are displayed.
Model Name: Model name
Serial No: Serial number
v
2/2
V
B
xxxxx
B
xxxxx
xxxxx
xxxxx
xxxxx
xxx
B
]: factory setting)
81
Status Menu