Toro 22323HD Operator's Manual page 32

Figure 37
1. Bolt (3)
5. Remove the bolt, washer, and bar securing the
battery (Figure 38).
Figure 38
1. Positive cable
2. Bar
3. Bolt and washer
6. Disconnect the negative (black) ground cable
from the battery post
fasteners.
7. Slide the rubber cover off the positive (red)
cable.
8. Disconnect the positive (red) cable from the
battery post (Figure
9. Lift the battery out of the chassis.
2. Battery-access panel
4. Negative cable
5. Battery
(Figure 38). Retain the
38). Retain the fasteners.
Charging the Battery
Important:
Always keep the battery fully charged
(1.265 specific gravity). This is especially
important to prevent battery damage when the
temperature is below 0°C (32°F).
1. Remove the battery from the machine; refer to
Removing the Battery (page
2. Charge the battery for 10 to 15 minutes at 25 to
30 A or 30 minutes at 4 to 6 A
not overcharge the battery.
g244209
1. Positive battery post
2. Negative battery post
3. When the battery is fully charged, unplug
the charger from the electrical outlet, then
disconnect the charger leads from the battery
posts (Figure
g243600
32
31).
(Figure
Figure 39
3. Red (+) charger lead
4. Black (-) charger lead
39).
39). Do
g003792