Page 9
Industrial Switching Hub (CC-Link IE TSN[Class A] /CC-Link IE Field Network Compatible) DT135TXA User's Manual Thank you for purchasing Mitsubishi's industrial switching hub. Before using this product, please read this manual carefully to thoroughly acquaint yourself with the product's functions and performance features in order to ensure correct and safe operation.
◆ Safety Precautions (Be sure to read this cautions before using the product) The user should read this manual carefully in order to use the product in a correct and safe manner. Cautionary information in this manual applies only to this product, and appears under "WARNING"...
Page 11
Installation Precautions CAUTIONS Use this product only in an environment which conforms to the environment ・ specifications given in this User's Manual. Using the product in environments outside the scope of these specifications could cause electrical shocks, fires, malfunctions, or product damage or deterioration.
◆ Features By using this product in an Ethernet network, such as the CC-Link IE, a star topology, line topology, or line/star composite topology can be structured. Since the AutoMDI/MDI-X function automatically identifies the straight cable or cross cable, wiring trouble caused by connection mistakes can be avoided. The transmission speed (10/100/1Gbps) and transmission method (full duplex/half-duplex) can be automatically recognized by the auto negotiation function.
Table 3.3 Performance specifications Item Specification IEEE 802.3ab 1000BASE-T Conforming standard IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T CC-Link IE TSN Authorization Class Class A Transmission speed 10/100/1Gbps (auto-recognition) Communication method All ports: Full/Half duplex Number of effective ports 5 ports Setup of ports AutoMDI/MDI-X cable...
◆ Connection Method Use this product as following. (1) Connect the Ethernet cable to one of the five Ethernet ports. (Order not specified) (2) Confirm that the connector connected to each port is accurately mounted. (3) Wire the power line "+" side to "PW +" on the power terminal block, and wire the power line "-"...
◆ Exterior Specifications [mm] Figure 6.1 External dimensions ◆ Warranty Information Users are requested to read the following warranty information with care. Charge-Free Warranty Period and Scope In the event of a product failure or flaw (hereafter referred to together as "failure") which occurs during the charge-free warranty period, and which is the responsibility of Mitsubishi, the product shall be repaired or replaced without charge by way of the outlet where it was purchased, or through the services of a Mitsubishi regional/branch office.
Page 16
5) Product failure due to a condition which could not have been anticipated within the scope of technology which existed at the time of shipment from Mitsubishi. 6) Product failure due to unavoidable external causes such as fires, or due to natural disasters such as earthquakes, thunderstorms, and damage by wind or floods, which are beyond the control of Mitsubishi.