Safety Equipment; Keep Machine Clean; Keep Operator's Compartment Clean; Leaving Operator's Seat With Lock - Komatsu GALEO PC200 Manual

SAFETY

SAFETY EQUIPMENT

Be sure that all guards and covers are in their proper position. Have guards and covers repaired immediately
if they are damaged.
Understand the method of use of safety features and use them properly.
Never remove any safety features. Always keep them in good operating condition.

KEEP MACHINE CLEAN

If water gets into the electrical system, there is a hazard
that it will cause malfunctions or misoperation. Do not use
water or steam to wash the electrical system (sensors,
connectors).
If inspection and maintenance is carried out when the
machine is still dirty with mud or oil, there is a hazard that
you will slip and fall, or that dirt or mud will get into your
eyes. Always keep the machine clean.

KEEP OPERATOR'S COMPARTMENT CLEAN

When entering the operator's compartment, always remove all mud and oil from the soles of your shoes. If you
operate the pedal with mud or oil affixed to your shoes, your foot may slip and this may cause a serious acci-
dent.
Do not leave parts or tools lying around the operator's compartment.
Do not stick suction pads to the window glass. Suction pads act as a lens and may cause fire.
Do not use cellular telephones inside the operator's compartment when driving or operating the machine.
Never bring any dangerous objects such as flammable or explosive items into the operator's cab.

LEAVING OPERATOR'S SEAT WITH LOCK

Before standing up from the operator's seat (such as when
opening or closing the front window or roof window, or
when removing or installing the bottom window, or when
adjusting the operator's seat), lower the work equipment
completely to the ground, set safety lock lever (1) securely
to the LOCK position, then stop the engine. If you acciden-
tally touch the levers when they are not locked, there is a
hazard that the machine may suddenly move and cause
serious injury or property damage.
SAFETY INFORMATION
2-11