Cleaning The Shaving Head And Oiling The Cutting Blade - Silvercrest 373829 2104 Operating Instructions Manual

Cleaning the shaving head and oiling the cutting
blade
NOTE
The cutting blade of the shaving head 1 can be cleaned with
►
water. Do not use any other liquids.
► Only use acid-free precision engineering oil, such as sewing ma-
chine oil, to oil the cutting blade.
1) First press the shaving head 1 forwards off the appliance with your
thumb (see fig. 8). Then pull the shaving head 1 upwards out of the
appliance (see fig. 9).
Fig. 8
2) Remove hair residue from the shaving head 1 with the cleaning
brush z (supplied).
3) Clean the shaving head 1 under running water. Do not use any
other liquids for cleaning.
4) Allow the shaving head 1 to dry.
5) Add a few drops of the supplied blade oil w to the cutting blade of
the shaving head 1 and distribute it evenly. Wipe off any access oil
with a soft cloth.
SHBS 500 D4
Fig. 9
│
GB│IE
19 ■