Cleaning And Care; Shaver; Shaving Attachment / Blade Unit - Silvercrest SRRP 3.7 A1 Operating Instructions Manual

7. Cleaning and care

DANGER! Risk of electric shock!
The hand-held part must be disconnected from the power ca-
ble before it is cleaned in water.
WARNING! Risk of injury!
Always switch off the device before cleaning it.
WARNING! Risk of material damage!
The blade unit 5 of the shaving attachment 6 can be
cleaned using water. Do not use any other liquids.
Do not use any astringent or abrasive cleaning agents.
NOTE: clean the device after every use.

7.1 Shaver

• Wipe down the housing of the shaver 9 with a damp cloth.

7.2 Shaving attachment / blade unit

Dry cleaning of the shaving attachment
1. Clean the 3 shaving heads 5 after each shave using the
cleaning brush 24.
2. Press the release button 7 on the shaving attachment 6, so
that the blade unit 5 opens.
3. Carefully tap the blade unit 5 to empty it.
4. Remove the hair remnants by using the cleaning brush 24.
18
GB