Silvercrest SRRP 3.7 A1 Operating Instructions Manual page 11

Pull the plug-in power unit out of the wall socket, ...
... after each charging process,
... if there is a fault,
... before connecting the device to the plug-in power unit,
... before you clean the device and
... during thunderstorms.
To avoid any risk, do not make modifications to the device.
Repairs must be carried out by a specialist workshop or the
Service Centre.
DANGER from batteries
Protect the battery against mechanical damages.
Fire hazard!
Do not expose the device to direct sunshine or heat. The am-
bient temperature should not be lower than -10 °C and high-
er than +40 °C.
The charge contacts on the device must not be connected by
metallic objects.
The battery may only be charged with the original accessory
(power unit).
Should the electrolyte solution leak out of the battery, avoid
contact with eyes, mucous membranes and skin. Rinse imme-
diately with plenty of clean water and consult a doctor. The
electrolyte solution can cause irritation.
The device is provided with a lithium-ion battery.
- The battery cannot be removed!
- This device must not be opened!
- The device with the installed battery must be disposed of
properly.
9
GB