Table of Contents
Advertisement
Operating Tips
•
Operate the traction unit at full throttle, full reel
speed (setting 9) and at the desired traction speed.
•
The maximum recommended blade penetration
depths are as follows:
– Model 03618 is 3 mm (1/8 inch).
– Model 03619 is 6 mm (1/4 inch).
•
Power requirements to operate the verticutter reels
will vary with turf and soil conditions. Travel speed
may need to be reduced in some conditions.
•
When operating in turf conditions where there is
excessive debris or thatch, open the front and
rear discharge shields to help allow the debris to
discharge from the reel.
CAUTION
Thrown debris could cause personal injury.
Do not open the rear shield so that it is
higher than level to the ground.
11
Advertisement
Table of Contents
