Table of Contents
Advertisement
2 Safety instructions
2.1 About this chapter
This HYDROTRAC GFT 8000 planetary gearbox was produced according to the
generally approved good engineering practice. There is, however, still a danger of
personal injury or damage to equipment if the following chapter and the safety
instructions of this documentation are not complied with.
Read this documentation thoroughly and completely before working with the
HYDROTRAC GFT 8000 planetary gearbox.
Keep the documentation in a place where it is accessible at all times to all
users.
When passing on the HYDROTRAC GFT 8000 planetary gearbox to third parties,
always do so together with the required documentation.
2.2 Intended use
The planetary gearbox is a subassembly.
Refer to the material number-specific operating instructions for the intended
use of your HYDROTRAC GFT 8000 planetary gearbox.
Observe the operating conditions and power limits as mentioned in the
technical data sheet. For this refer to the material number-specific operating
instructions.
The planetary gearbox is intended only for professional use and not for private
use.
Intended use includes that this documentation, especially chapter 2 "Safety
instructions" has been read and understood.
2.3 Improper use
Any use other than described in intended use is not in accordance with the
requirements and, therefore, is not permitted.
Bosch Rexroth AG assumes no liability for damage resulting from improper use.
The risks associated with improper use lie solely with the user.
Also the following expected foreseeable misuses are not improper use (this list is
not exhaustive):
• Use outside the operating data released in the specifications or the order
confirmation
• The use of inadmissible liquids, e.g. water or unreleased lubricating oils
• The use of the planetary gearbox in other applications than described in
chapter 2.2 "Intended use"
• The use of the planetary gearbox and its mounting parts in explosion-prone
environments
• The use of the planetary gearbox as a safety-related part of a control unit
• The use of the planetary gearbox in an environment with aggressive substances
and gases
• Change of the factory settings by unauthorized persons
• The use of the planetary gearbox when the external pressure exceeds the
internal pressure (housing pressure)
RE 79022-01-B/04.2020, General Operating Instructions HYDROTRAC GFT 8000 series 40, Bosch Rexroth AG
Safety instructions
9/70
Advertisement
Table of Contents
