Representation Of Information; Safety Instructions; Symbols - Bosch rexroth Sytronix SvP 7030 IMC Operating Manual

Variable-speed pump drive
Table of Contents

Advertisement

Sytronix SvP 7030 IMC
8 / 186

Representation of information

Title
Rexroth Sytronix Mounting and Commissioning Axial
Piston Variable Pump - A10VZO/A10VSO/A4VSO
Control Cabinet: Air Conditioning, EMC, Design, IP
Code, Electrics, IndraDrive, Rexroth EFC/Fv, Sytronix
Rexroth Connection Cables IndraDrive and IndraDyn
Pressure transducer for hydraulic applications, type
HM20
Pressure transducer for hydraulic applications, type
HM20
1.3
Representation of information
In order that this documentation allows you to work directly and safely with
your product, standardized safety notes, symbols, terms, and abbreviations are
used. For a better understanding, they are explained in the following sections.
1.3.1

Safety instructions

In this documentation, safety instructions are contained in chapter 2 and
chapter 3 and wherever sequences of actions or instructions are explained
which bear the risk of personal injury or damage to property. The hazard avoid-
ance measures described must be observed.
Safety instructions are structured as follows:
● Warning symbol: draws attention to a hazard
● Signal word: identifies the degree of hazard
● Type and source of danger!: identifies the type or source of the hazard
● Consequences:describes the consequences in the case of non-observance
● Precautions:states, how the hazard can be avoided
Hazard classifications according to ANSI Z535.6-2011
1.3.2

Symbols

The following symbols indicate notices which are not safety-relevant but
increase the comprehensibility of the documentation.
If this information is disregarded, the product cannot be used or operated in an
optimum manner.
● Individual, independent action
Bosch Rexroth AG
Type and source of danger! and consequences in the
WARNING
case of non-observance
Hazard avoidance measures
In case of non-compliance with this safety instruction,
DANGER
death or serious injury will occur.
In case of non-compliance with this safety instruction,
WARNING
death or serious injury could occur.
In case of non-compliance with this safety instruction,
CAUTION
minor or moderate injury could occur.
In case of non-compliance with this safety instruction,
NOTICE
property damage could occur.
Numbered instruction: The numbers indicate that the actions must be
carried out one after the other.
Document no. Document type
R911341629
Mounting instruc-
tions
R911344988
Project Planning
Manual
R911322949
Selection data
RE 20372
Data sheet
RE 20272-B
Operating
instructions
RE 62312-B, 03.2022

Advertisement

Table of Contents
loading

Table of Contents