Pressure Transducer; Identification Of The Product; Plates On The Drive Controller - Bosch rexroth Sytronix SvP 7030 IMC Operating Manual

Sytronix SvP 7030 IMC
30 / 186

Identification of the product

5.3.4

Pressure transducer

Fig. 4: Pressure transducer HM20-2X
Further information on the pressure transducer can be found in data sheet RE
30272 and operating instructions 30272-B.
Please note that the analog input on the basic device cannot be configured for
4..20 mA. If you wish to use a pressure transducer for 4..20 mA, you require a
DA extension.
5.4 Identification of the product
5.4.1

Plates on the drive controller

Positions of the plates
Table 8: Positions of the plates
Bosch Rexroth AG
1 Warning labels
2 Type plate
3 Additional plate
RE 62312-B, 03.2022