Table of Contents
Advertisement
2
Safety instructions
2.1
About this chapter
The Sytronix system is designed and manufactured according to the generally
accepted code of practice. However, there is still a risk of personal injury and
damage to property if you do not observe this chapter and the safety instruc-
tions in this documentation.
● Read this documentation completely and thoroughly before working with the
● Keep this documentation in a location where it is accessible to all users at
● Always include the required documentation when you pass the product on
2.2
Intended use
This product is an electro-hydrostatic drive system. You may use the product as
follows:
● For controlling a flow with alternating pressure control functionality (p/Q
● As a pure high-precision hydraulic pressure supply.
The Sytronix system is intended exclusively for being integrated in a machine or
installation or for being assembled with other components to form a machine
or system. The product may be commissioned only if it is integrated in the
machine/system for which it is designed.
Make sure that components supplied by the customer, e.g. electric drives, are
sufficiently dimensioned.
Observe the technical data, operating conditions and performance limits
according to the data sheet and the order confirmation.
The product is intended exclusively for professional use and not for private
usage.
Operation according to the intended use also implies that you have read
and understood this documentation completely, especially chapter 2 "Safety
instructions".
No plausibility checks and no checks of actual values (pressure and speed) are
provided in the Sytronix system.
Make sure that the plausibility check is executed in the machine control.
For application-specific adjustment of the parameters within the framework of
initial commissioning, please get in touch with your technical contact at Bosch
Rexroth.
2.3
Improper use
Any use other than described in the section "Intended use" is considered as
improper and is therefore not permitted.
The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating states in the application which in turn
could cause personal injuries and/or damage to property. Therefore, please
only use a product for safety-relevant applications if this use is expressly speci-
fied and permitted in the documentation of the product. For example, in explo-
sion-protection areas or in safety-related parts of a control (functional safety).
Bosch Rexroth AG does not assume any liability for damage caused by improper
use. The user assumes all risks involved with improper use. Improper use of the
product includes:
RE 62312-B, 03.2022
Sytronix system.
all times.
to third parties.
control).
Sytronix SvP 7030 IMC
Improper use
Bosch Rexroth AG
11 / 186
Advertisement
Table of Contents
