Logitech ZONE 950 - Wireless Headset with Active Noise-Cancelling Manual

KNOW YOUR PRODUCT

WHAT'S IN THE BOX

1. Headset
2. USB-C receiver
3. USB-A adapter USB-C USB-A USB-C
4. USB-C to C charging cable
5. Travel bag
6. User documentation

POWER ON / OFF

1. Slide power switch to the center
   
2. Once powered on, light indicator turns white
3. To power off, slide power switch to the power icon

PAIRING VIA USB RECEIVER

1. USB-C
   Insert the receiver into the computer USB-C port
   USB-A
   Insert the USB-C receiver into the USB-A adapter Then insert the adapter into the computer USB-A port
2. Headset is already paired to the receiver it ships with Just power on the headset Once successfully paired, the light indicator on the receiver will remain solid white Light indicator on the headset will turn solid white
3. Make sure "Zone 950" is selected on the computer sound setting

PAIRING VIA BLUETOOTH

1. Slide power switch to the Bluetooth icon and hold for 2 seconds Light indicator will flash blue rapidly
2. Open Bluetooth settings on your device
3. Select "Zone 950" in discoverable devices
4. Once successfully paired, light indicator will turn solid white

Tip: When the headset is paired to the laptop, if needed, go to the sound setting and select "Zone 950 Stereo" for the best music quality and select "Zone 950 Hands-Free" for calls

ADJUSTING THE UNIT

1. Adjust headset by sliding earcups up and down the headband
   
2. Swivel earcups to fit on your ear
   
3. It may be easier to adjust the headset on your head Move the earcups up and down the headband until they sit comfortably on your ears

ADJUSTING THE MICROPHONE BOOM

Microphone boom rotates 270 degrees.
Wear it on either left or right side Audio channel will switch automatically, depending on the direction you are wearing the microphone.

CHARGING

Headset automatically powers off when left idle.
Sleep timer can be changed in Logi Tune app.
Headset indicator light will turn RED when battery is low.

Charging via USB cable

1. Plug the USB-C cable end into the USB-C port on the bottom of the earcup
2. Plug the USB-C end into the USB-C charging port on your computer
3. Indicator light will be a breathing white light for charging

Indicator light will be solid white when fully charged

• 2 hours of charging fully charges the battery
• 5 minutes will give you 1 hour of talk time

4. Headset can be used with receiver and Bluetooth paired while charging It can also be used as a corded headset with the USB-C cable connected while the headset is powered off

DEVICE CONTROLS

Button	Usage		Action
	Call controls	Answer / End call	Short press
		Reject call	2 seconds press
		Resume call	Short press
	ANC controls	Toggle between ANC and Transparency	Short press
		ANC and Transparency off	2 seconds press
	Media controls	Play / Pause	Double tap
		Track forward	Triple tap
	Volume controls	Volume up	Swipe up
		Volume down	Swipe down
	Headset status	Check connectivity and battery status	Tap and hold for 2 seconds
	Mute	Mute on	Short press
		Mute off	Short press
	Voice assistance	Trigger voice assistant	2 seconds press (when mic boom is down)

Note:

• Media control functionality depends on the type of application
• Call activities are always the first priority over media streaming When two devices are connected, the Bluetooth connection will be prioritized over the receiver When two Bluetooth devices are connected, the last active device will take a priority over the other And the priority between two Bluetooth devices can be customized on Logi Tune app under Connected devices

Tip: ANC and touch controls can be customized on Logi Tune app

MUTE

There are 3 ways to mute your microphone

1. Press the button to mute
   
2. Flip up or down the mic boom to mute or unmute *
   
3. Simply take the headset off to mute and put it back to unmute To use this feature, enable it on Logi Tune app
   

* Can be disabled on Logi Tune app

Voice prompts indicate when the mic is mute on/off

ACTIVE NOISE CANCELLATION (ANC)

ANC blocks out the noise around you to help you concentrate on the task at hand

• Press the ANC button on the side of the earcup to toggle between ANC and Transparency mode
  
• There will be voice prompts when switching between modes

Note: ANC button can be customized to cycle through up to 4 different modes on Logi Tune app

DEVICE LIGHT INDICATOR

RECEIVER INDICATOR LIGHT

ON-HEAD DETECTION

Sensors on the headset can detect if the headset is worn or not and control the status It can be disabled or enabled on Logi Tune app

Note: Functionality depends on the type of application

Auto pause/resume
During media streaming, when the headset is taken off, the media will pause When the headset is put on, the media will resume

Answer incoming call
When there is an incoming call, put on the headset to answer the call To use this feature, enable it on Logi Tune app

Mic mute/unmute
During an ongoing call, when the headset is taken off, the mic will be muted When the headset is put on, the mic will be unmuted To use this feature, enable it on Logi Tune app

AUDIO OVER USB (DENSITY-FRIENDLY)

If your audio is unstable during a call because there are too many wireless devices nearby (high density), the headset can be used as a corded headset

1. Turn off the headset
2. Connect the headset to the USB cable provided And plug the other side of the USB-C cable into the USB-C port on your computer
   
3. Make sure "Zone 950" is selected on the audio device setting.

Note: Headset would be charged during this mode. Button controls may not be available in this mode.

LOGI TUNE

Logi Tune helps boost your headset performance with periodic software and firmware updates Learn more and download Logi Tune at logitech com/tune, the Apple App Store or Google Play store.

logitech.com/tune

ADJUSTING SIDETONE

Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking In Logi Tune app, select the sidetone feature, and adjust the dial accordingly

• higher number means you hear more external sound
• lower number means you hear less external sound

AUTO SLEEP TIMER

By default, your headset will automatically power off when not in use for 1 hour Adjust the sleep timer in Logi Tune app

PERSONAL EQ

Create a personalized sound equalizer that is optimized for your hearing in Logi Tune Mobile app
Through a simple listening test, our algorithm detects what you hear and adjusts frequencies to best deliver the sound you've wanted

Note: This applies to music quality instead of call audio quality

ADVANCED CALL CLARITY

Reduces the ambient noise from the far end of a call to hear them more clearly.
Enable it in Logi Tune app and select low or high mode depending on the noise loudness.

• WIth this feature enabled, you can enjoy up to 12 hrs (ANC on) or up to 14 hrs (ANC off) of talk time

HEARING PROTECTION

Zone 950 provides three types of protection to help you hear safely

Peak limiting:
Audio volume is always limited at 100dBA to prevent hearing damages

Anti-startle protection:
Once enabled it in Logi Tune app, it eliminates sudden audio spikes to avoid acoustic shocks as per Australian G616 guideline This applies to call activities only

Noise exposure over time:
Once enabled it in Logi Tune app, it protects your ears from the noise exposure over an 8-hour period with a limit up to 85dBA as per Australian G616 guideline This applies to call activities only

UPDATE YOUR UNIT

It is recommended to update both your headset and receiver To do so, download Logi Tune from logitech com/tune

Note: Turn off and on the headset after the update is completed to make sure it is successfully done

RECONNECT YOUR UNIT

In case the headset is disconnected to the receiver, you can reconnect your headset via Logi Tune

1. Plug USB-C receiver or USB-A adapter with the USB-C receiver into the computer USB port
2. Power on the headset by sliding the power switch to the center
3. Open Logi Tune Desktop on your computer
4. Select "Zone Receiver" from the dashboard
5. Wait while it is looking for the previously connected headset
6. If no headset is shown as connected to the receiver, click "Pair headset"
7. Enter pairing mode on the headset by sliding the power switch to the Bluetooth icon and holding it for 2 seconds Light indicator will flash blue rapidly
8. Once successfully paired, the light indicator on the receiver and on the headset will turn solid white

RESET YOUR UNIT

To reset your headset back to its original state, power headset on, hold the power button to the pairing mode and long press the ANC button for 5 seconds The headset is successfully reset when the headset light indicator blinks fast in red and white 3 times and turns off

DIMENSIONS

Headset:
Height x Width x Depth: 183.9 x 179.1 x 70.0 mm

Weight:
0.23 kg

Receiver:
Height x Width x Depth: 26.6 x 12.4 x 6.5 mm

Adapter:
Height x Width x Depth: 24.5 x 15.4 x 8.7 mm

SYSTEM REQUIREMENTS

Works with common calling applications across almost all platforms and operating systems Works with Windows, Mac, or Chrome-based computer via USB-C, USB-A, Bluetooth and iOS or Android Bluetooth enabled devices

TECHNICAL SPECIFICATIONS

Microcrophone type: 5 omnidirectional MEMS
Frequency response (headset): 20~20 kHz (music mode), 100~8 kHz (talk mode)
Frequency response (microphone): 100~8 kHz
Battery type: Built-in battery (lithium ion)
Battery life (talk time): Up to 15 hrs (ANC on), up to 18 hrs (ANC off)
Battery life (listening time): Up to 22 hrs (ANC on), up to 40 hrs (ANC off)
Bluetooth version: 5 2
Wireless range*: Up to 50 m/170 ft (open field line of sight)
USB-C to C charging cable: 1 5 m
Compliant to EN50332-2

*Wireless range may vary based on environmental and computing conditions

© 2023 Logitech Logitech, Logi, Zone, and their logos are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U.S. and other countries Apple, the Apple logo, iOS, and Mac are trademarks of Apple Inc, registered in the U.S. and other countries App Store is a service mark of Apple Inc Android, Chrome, Google Play and the Google Play logo are trademarks of Google LLC The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Logitech is under license Windows is a trademark of the Microsoft group of companies USB-C and all other 3rd party trademarks are the properties of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice

Documents / Resources

References

• Logi Tune Software
• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Logitech ZONE 950 - Wireless Headset with Active Noise-Cancelling Manual